If you live in Raleigh and need some service work or a repair done to your Hyundai, Creech Import will be here to help you out. We have a team of expert Hyundai Repair Raleigh mechanics who know about common problems with different Hyundai models, which means we’ll be able to diagnose your problem quickly so we can get you back on the road as soon as possible. Here at Creech Import, we understand how important your vehicle is to you and your daily routine, so we make sure we fix it right the first time.
Specializing in all Hyundai models. We can work on the following Hyundai models:
- Genesis Coupe
- Santa Fe
- Check engine light
We’ve seen many Hyundai’s and Toyota’s in our shop recently with a “check engine light” illuminated for a code P0441. This is related to the evaporative emissions system which controls the fuel vapors in the fuel tank and prevents HC’s from leaking into the atmosphere. Many times the culprit for this code is a faulty canister purge/solenoid valve. This component basically controls vapor/vacuum flow between the charcoal canister which stores the fuel vapors and the fuel tank, and manifold vacuum. It’s controlled or turned on by the ECU or Electronic Control Unit. Some of but not limited to vehicles affected are 2005 Hyundai Sonata, 2004 Toyota Sienna. 2006 Toyota Camry, 2008 Hyundai Santa FE. The purge valve failure doesn’t in any way affect the reliability or driveability of the vehicles.
2009 Hyundai Elantra Common Issue
Clunking noise in steering column when turning.
Cause, rubber star bushing worn.
Replace rubber star busing in steering column
On many Hyundai models, a clunking noise may be heard in steering column when turning. The steering column pictured below is a 2009 Elantra and was in the shop with this symptom. Many cars today have electric power-assisted steering as opposed to the standard hydraulic assist. The star bushing goes between the electric motor and the steering column gear. This repair does not require removing the entire steering column, but for other reasons, we had to remove this one so we took the opportunity to share these pics and info on this problem.
Hyundai Repair in Raleigh, NC
Our 5-star rated repair shop here in Raleigh, NC, has the right equipment to ensure we find out what’s wrong when your vehicle is experiencing issues. Most shops may be limited to only pulling codes from your vehicle, but they don’t have the tools and expertise to pinpoint the problem. We have state-of-the-art diagnostic equipment as well as our own personal experience with common Hyundai problems. You can rest assured that when we diagnose your vehicle that we’ll be providing you with an estimate for the exact problem.
Come to us for Maintenance
One of the best ways to ensure that your Hyundai has a long life is to bring it down to us for regularly scheduled maintenance. We have the tools to do everything from oil changes to transmission services to brake repairs and much more. We can even replace your timing belt to help your Hyundai last another 100,000 miles. While we’re performing maintenance on your vehicle, we’ll do a full inspection so we can give you a heads up if we see signs of any leaks or abnormal wear on your tires.
We Warranty Our Work For All Hyundai Repair
We’re a TECH-NET PROFESSIONAL AUTO SERVICE center, which means you have some assurance that we’ll take care of your Hyundai if any of the parts we replaced fail in the future. Not only will we cover the parts and labor under warranty, but you can go to any TECH-NET PROFESSIONAL SERVICE center in the country and still have your warranty honored. The warranty duration is 24 months or 24,000 miles, whichever comes first.